Disposal And Recycling - Axis M31-L Serie Guia De Instalacion

Ocultar thumbs Ver también para M31-L Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
in which case the user will be required to correct the
interference at his own expense.
Using a shielded network cable (STP) – This
equipment has also been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
To be used in a residential area or a demanding
electrical environment, the product shall be
connected using a shielded network cable (STP) that
is properly grounded.
Canada
This digital apparatus complies with
CAN ICES-3 (Class B). The product shall be
connected using a shielded network cable (STP)
that is properly grounded. Cet appareil numérique
est conforme à la norme CAN NMB-3 (classe B). Le
produit doit être connecté à l'aide d'un câble réseau
blindé (STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class B limit of EN 55022.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class B limit of
AS/NZS CISPR 22. The product shall be connected
using a shielded network cable (STP) that is properly
grounded.
Japan
この装置は、クラスB 情報技術装置です。こ
の装置は、家庭環境で使⽤することを⽬ 的
としていますが、この装置がラジオやテレビ
ジョン受信機に近接して使⽤されると、 受信
障害を引き起こすことがあります。 取扱説明
書に従って正しい取り扱いをして下さい。 本
製品は、シールドネットワークケーブル(STP)
を使⽤して接続してください。また適切に
接地してください。
Korea
이 기기는 가정용(B급) 전자파적합기기로서
주로 가정에서 사용하는 것을 목적으로 하며,
모든 지역에서 사용할 수 있습니다. 적절히
접지된 STP (shielded twisted pair) 케이블을
사용하여 제품을 연결 하십시오.
Safety
This product complies with IEC/EN/UL 62368-1,
safety of audio/video and IT equipment.
If its connecting cables are routed outdoors, the
product shall be grounded either through a shielded
network cable (STP) or other appropriate method.
When used with Power over Ethernet (PoE), the Power
Sourcing Equipment (PSE) shall comply with IEEE
802.3af and Limited Power Source (LPS) according
to clause 2.5 of IEC/EN/UL 60950-1 or annex Q of
IEC/EN/UL 62368-1.
We recommend the use of Axis midspans or Axis PoE
switches.

Disposal and recycling

When this product has reached the end of its
useful life, dispose of it according to local laws
and regulations. For information about your
nearest designated collection point, contact your
local authority responsible for waste disposal. In
accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall
not be disposed of together with household or
commercial waste. Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE) is
applicable in the European Union member states.
To prevent potential harm to human health and the
environment, the product must be disposed of in an
approved and environmentally safe recycling process.
For information about your nearest designated
collection point, contact your local authority
responsible for waste disposal. Businesses should
contact the product supplier for information about
how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the requirements
of SJ/T 11364-2014, Marking for the restriction of
hazardous substances in electrical and electronic
products.
Tabla de contenido
loading

Este manual también es adecuado para:

M3104-lM3105-lM3106-l mk ii

Tabla de contenido