Optional Accessory - Makita XCC01 Manual De Instrucciones

2. Unscrew the water supply cap attached to the
water supply tank.
2
1
► 1. Water supply cap 2. Water outlet
NOTICE:
Be careful not to lose the rubber washer
placed at the bottom of the water supply cap when-
ever you reassemble the cap.
3.
Attach the water supply cap onto the cap plug of
the hose.
► 1. Water supply cap 2. Cap plug
4. Insert the hose with the water supply cap pointing
downwards into the water supply holder until it locks
with a click.
1
2
► 1. Water supply cap 2. Water supply holder
Disconnecting from the mains water
supply
1.
the "OFF" (O) position and turn the water off.
2.
hose, and then pull the hose off.
► 1. Eject button
3.
water outlet.
2

Optional accessory

1
Removing standard-equipped wheel
cover
Remove all the attachments on the pre-installed wheel
cover before replacing it with an optional cover.
Loosen the screw and pull the cover apart from the gear
housing.
► 1. Screw
12 ENGLISH
Set the water supply lever on the wheel cover in
Press the eject button to release the water supply
1
Remove the water supply plug from the supply
Installing dust cover
CAUTION:
When installing an optional wheel
cover, be sure to tighten the screw securely.
1