Wall Mounting - Blumfeldt Gold Bar 2000 Swing Manual Del Usuario

WALL MOUNTING

When unpacking the heater, make sure that all parts are present, that there
are no components left in the box and that all parts are free of packing
material.
Note: Do not connect the heater to the power supply until the entire
assembly is complete. Do not connect the heater to the power supply if any
of the components or the power cord is damaged in any way. If in doubt,
please contact the manufacturer.
Wall mounting
Mark the 4 drill holes and drill 4 holes with a diameter of 10 mm into the wall.
Insert the 4 expansion bolts in the holes. Then align the heater with the bolts
and tighten the 4 nuts.
EN
15