Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Radio
Memorising stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorises them. You can store up
to 10 stations on each band (FM 1, FM 2, MW
and LW).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:
Tape ˜ Tuner
2
Press (MODE) repeatedly to select the
desired band.
Each time you press (MODE), the band
changes as follows:
z FM 1
z FM 2
3
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "B.T.M" appears.
4
Press (4) (n) until "B.T.M" flashes.
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds and the setting is stored.
5
Press (SHIFT).
Notes
• The unit does not store stations with weak signals. If
only a few stations are received, some number buttons
remain empty.
• When a preset number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
z MW
z LW
Memorising only the
desired stations
You can store up to 10 stations on each band
(20 for FM 1 and FM 2, 10 for MW or LW) in
the order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
desired band.
3
Press either side of (SEEK/AMS) to tune
in the station you want to store on the
number button.
4
Keep the desired number button ((1) to
(10)) pressed until "MEM" appears in the
display.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Receiving the memorised
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
desired band.
3
Press the number button ((1) to (10))
momentarily where the desired station is
stored.
EN
7
Capítulos
Tabla de contenido
Solución de problemas
