Sony SU-WL450 Manual Del Usuario página 11

4
Decide the positions of the
screws for installing the Base
(20) .
Refer to the specifications on page 21.
When selecting 2-a, please use the hole
positions of Base Adaptor .
WARNING
 Determine the strength of the wall the TV or LCD
Monitor will be mounted on. Reinforce the wall
sufficiently, if necessary.
 The wall that the TV or LCD Monitor will be mounted
on should be able to support a weight of at least four
times that of the TV or LCD Monitor (Refer to your
TV's or LCD Monitor's Reference Guide for its weight.).
2-a


2-b

5
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV
or LCD Monitor.
Dry wall with studs
Note
 Pilot holes must be drilled to a depth of 75 mm, using
a 5.5 mm diameter drill bit.
Solid Concrete or Concrete Block
− 11 (GB) −
75 mm
5.5 mm
Stud or Reinforcement
75 mm
10 mm
GB