Ventilation; Door Reversibility - Indel Webasto Marine isotherm CR165 Instrucciones Para La Instalación Y El Uso

User Manual

4.2 Ventilation

It is extremely important for the compressor/condensing unit located behind the
refrigerator to be well ventilated so that the fresh air can enter at the bottom and
pass behind the refrigerator, with the hot air being allowed to escape from the top
or sides.

4.3 Door Reversibility

The opening direction of Isotherm Cruise Silver Line refrigerator doors can be
reversed to meet installation requirements.
To reverse the opening direction of the doors, remove the plastic cover at the top of
the refrigerator. This is fastened with 4 screws: 2 at the back and 2 at the top, hidden
by small plastic caps (Top Fig.9, Back Fig.10).
Once the top cover has been removed, the hook hinge is visible, fastened with 3
screws where the top part of the freezer door is fastened. The hinge should be
fastened at the top left in a perfectly symmetrical manner, but before you can fasten
it you will have to remove all other hinges (Right side Fig.11, Left side Fig.12).
Change the direction of the pin on the top hinge (Fig. 13).
Remove the central hinge, fastened with 2 screws. Once this has been done, you can
remove the refrigerator door (Fig. 14).
Remove the lower hinge, also removing the plastic foot. Re-install everything on
the lower left side, changing the direction of the hinge and the direction of the pin
supporting the door (Fig. 15 and 16).
It is now possible to re-install all parts in the following order:
1. Refrigerator Door
2. Central Hinge
3. Freezer Door
4. Upper Hook Hinge
5. Upper Plastic Cover
50