Ventilation; Ice Maker (Dr160 Combo Model Only) - Indel Webasto Marine Isotherm DR49 Instrucciones Para La Instalación Y El Uso

User Manual

4.3 Ventilation

It is extremely important for the compressor/condensing unit located behind the
refrigerator to be well ventilated so that the fresh air can enter at the bottom and
pass behind the refrigerator, with the hot air being allowed to escape from the top or
sides (Fig.1).
The illustrations (Fig.2-3) show an example of how the refrigerator housing should be
set.

4.4 Ice Maker (DR160 COMBO model only)

In the DR160 COMBO model, a modular unit for ice production (Modular Icemaker
Kit) is present. It is situated in the product's freezer compartment.
Ice production water network connection:
This appliance must be supplied only with cold water approved for human
consumption (drinking water).
The water supply tube of the unit is located on
the back. When the unit is packaged, the tube is
fastened with tape to the rear wall of the unit. See
Image
The unit can be directly connected to the water
supply on board. Its pressure must be contained
between 1bar and 10bar.
57