Usage Recommendations - Indel Webasto Marine isotherm CR165 Instrucciones Para La Instalación Y El Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115

2.2 Usage recommendations

If possible, the refrigerator should be turned on for about 6 hours prior to
inserting the food items.
Frequent opening of the refrigerator door will result in greater power
consumption.
Ensuring adequate ventilation for the compressor and the condensing unit will
significantly reduce power consumption.
Never obstruct the refrigerator's ventilation system.
The electrical system must be kept in good condition. Inspect the batteries and
check the charge levels regularly. Always use a starter battery separate from the
motor.
Keep the inside of the refrigerator clean and dry. Remove the condensation
water from the drip tray beneath the refrigerator's freezer compartment where
present.
To keep the surface of the door in good conditions and intact, make sure that it
is always clean and dry.
The unit has been designed with a product lock protection in the event of low
battery voltage. In the event of a compressor block, follow the instructions in
this manual and/or contact specialised technicians or Indel Webasto Marine Srl
service centres.
The compressor can operate up to an angle of 30°, while greater angles can
cause permanent damage to the compressor.
44
User Manual
Tabla de contenido
loading

Este manual también es adecuado para:

Isotherm cr219Isotherm cr271

Tabla de contenido