Mounting the Print Server
The PS112 is an Ethernet network interface card for the following Citizen printers:
CT-S300, CT-S2000, CT-S4000, PPU-700, and the CD-S500 series.
Do not connect the print server to other printer models!
The card is simply inserted into the slot of the serial or parallel interface. The
serial or parallel interface of the printer must be removed.
Prepare the printer
1. Turn the printer off.
2. Disconnect the printer's power cord.
3. Remove the screws from the interface cover.
4. Remove the serial or parallel interface.
Insert the print server
1. Insert the print server board into the slot until the board locks
2. Fasten the print server board screws.
Hardware Installation Guide
Proceed as follows:
Proceed as follows:
into the receptacle.
13
