Assembly
1
Flush through the supply pipes.
2
Mount the S - unions and align them.
3
Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
14412000 The flow is changed from bath to
shower function by pulling the knob at the upper
side of the spout. After shutting off the water
flow, the mixer returns automatically to the bath
function.
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G ½:
Rate of flow:
anti-pollution function
4
max. 1 MPa
0,1 – 0,5
1,6 MPa
max. 85° C
65° C
cold right - hot left
ca. 20 l/min 0,3 MPa
English
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Important!
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts see page 3
1
handle
1.1 screw cover
2
flange
3
nut
4
cartridge cpl.
5
flange
6
S-union
7
aerator cpl.
8
selector assy
9
diverter knob
10
non return valve
98558000
94186000
96656000
96690000
92730000
94135000
94140000
13914000
94077000
94078000
94074000
