TRAPP Master 1000 Manual De Instrucciones página 28

3 - Personal safety.
✔
Pay attention to what you are doing, with
what happens near you while you're working
and always rely on your common sense. Do
not operate the equipment when you are tired,
distracted or under the influence of drugs,
alcoholic beverages or medication. Any slip of
attention could result in serious injury.
✔
Use personal safety equipment.
Always wear goggles. When you wear
personal safety equipment, i.e. goggles, gloves,
shoes, anti-skid boots and ear protection you
increase the level of safety and reduce
hazards.
✔
Prevent accidental operation. Make sure that
the on/off key is in the "off" position before
you plug the cord. Connecting the equipment
to the power source when it is "on" can lead
to serious accident.
✔
Remove unwanted objects before you turn on
the equipment. A tool or any object that might
become attached to the equipment's moving
parts can cause injury.
✔
Do not be over-confident. Keep both feet on
the ground for balance. This also helps you to
control the equipment more efficiently during
unexpected situations.
✔
Dress accordingly. Do not wear loose clothing
or jewellery. Keep your hair and clothes away
from the moving parts to avoid them from
becoming entangled.
4 - Operation and safety measures.
✔
Don't twist the equipment. Use it correctly
and for the applications described in this
manual for improved performance and safety
while you are working.
✔
Don't use the equipment if the switch doesn't
turn "on" or "off". The equipment can't be
controlled if the switch is damaged. A
damaged power switch must be immediately
repaired.
✔
Disconnect the plug from the power source
before you do any adjustments, change the
cutting blade and accessories. This safety
measure reduces the risk of accidental
operation.
26
✔
When the equipment is not being used, store
it away from children's reach and don't let
anyone who is not familiar with how it works
to operate the equipment. The equipment can
be dangerous when handled by
inexperienced users.
✔
Take good care of your equipment. Always
check if the blade is firmly attached to the
shaft, if there are any damaged parts or any
other problem that could affect good-
operation conditions. If there are any
problems, repair the equipment before using
it. Lack of proper maintenance is the cause of
many accidents.
✔
Keep the cutting blade honed and clean and
the spool supplied with the nylon filament
and ready to be used. Never use metal wire
to replace the nylon filament.
✔
The cutting blade and/or the spool always
keeps on moving after the equipment has
been turned off. Remember this whenever
you are doing any kind of maintenance.
✔
Use the equipment and accessories
according to the work and service
instructions that will be done. Using the
equipment for other purposes than those
included in this manual can be dangerous.
Note:
We recommend using a protection device
against residual current (DR device) with
coverage below or equal to 30MA on your
power supply (check with a professional
electrician).
Warning!
✔
Using the equipment without the
protection skirt is considered loss of
warranty.
5 - Service
✔
Your equipment must be serviced only by
qualified professionals and only original
Trapp spare parts should be used. Always use
an authorised TRAPP technical assistance
service.