Important Recommendations - TRAPP Master 1000 Manual De Instrucciones

Congratulations!
You have acquired a quality product that has been developed using
TRAPP's spearhead technology.
With this cost-effective and safe product, you can do your work quickly and safely.
For this, you must observe some extremely important safety measures in this Instruction Manual.
It is not possible to predict all the situations that might occur. It is up to the operator to
understand that common sense, attention and careful operation cannot be added to the product -
those who use and maintain the equipment are responsible for these factors.
Warning!
Read all the instructions in this manual
before you start operating the equipment.
Follow all the safety instructions to avoid
accidents and/or injuries.
Read and keep these instructions.
1 - Work area.
✔
Check the area where you will use the
equipment. Remove stones, wood debris,
wire, bones, glass and other unwanted objects
that could be flung by the equipment and hurt
badly both animals and people.
✔
Do not use the equipment near explosive-
prone atmosphere nor where there are
flammable liquids, gases or suspended dust.
The motor produces sparks that could ignite
the flammable liquid, gases or suspended
dust.
✔
Keep children and bystanders away. When
the equipment is being used, everyone must
stay away - especially children - at a safe
distance of at least 20 meters far from the
operator. The operator/user is responsible for
avoiding accidents.

Important recommendations

✔
Think how you will move to do the cutting.
Before you turn on the equipment, simulate
the movements. The right way to do it from
the right to the left.
2 - Power safety.
✔
Use the right extension cord. Always use the
right extension cord, which must be in good
shape, i.e. cannot be mended - never use
insulating tape to make repairs - you will
reduce the risk of electric shocks.
✔
Do not move the equipment by the cord.
Never use the extension cord to carry, pull or
unplug the equipment from the power source.
Keep the extension protected from heat, oil,
sharp edges and especially from the
equipment's own blade.
✔
Do not expose the equipment to rain or
damp. If water finds its way into the
equipment the risks of electric shock
increases.
✔
This equipment runs with a universal-type
motor and comes with a thermal protector.
This protection could activate while you are
using the equipment if it overloads. If this
happens, do the following:
• Turn off the on/off key and remove the cord
from the power source and wait for approx.
25 minutes before you turn it on again
• If the equipment turns off again
automatically call a TRAPP assistance service.
25