Manual Operation - EDM Product 08792 Manual De Instrucciones

3. If you want the device to be positioned on the
ground, ensure that the latter is even.
4. Attach the nylon cord to an easily accessible
position, so you can pull the device back out after
pumping has been completed.
OPERATION
Switching the device on
Once you have completely installed the device as described in the
Start-up chapter, you can switch it on.
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
▶ Plug the mains plug into a sufficiently fused mains socket.
The device will be switched on when the float switch (4) is situated
above the set or the maximum switch-on height. (see fig. 12 on posi-
tion a)
▶ The device will be switched off as soon as the float switch (4)
reaches the set or the minimum switch-off height. (see fig. 12 on
position b)
fig. 12
Once the device has been switched off, any water still
remaining in the line can flow back through the device.

MANUAL OPERATION

You can also use the device in manual operation. (see fig. 9)
Instruction manual
fig. 13
Ref. 08792
ES
PT
EN
FR