Transport And Storage; Assembly And Installation - EDM Product 08792 Manual De Instrucciones

TRANSPORT AND STORAGE

ES
Notice
If you store or transport the device impro-
perly, the device may be damaged.
PT
Note the information regarding transport
and storage of the device.
Transport
EN
Before transporting the device, observe the following:
▶ Hold onto the mains plug while pulling the power cable out of the
mains socket.
FR
▶ Do not use the power cable to drag the device.
Storage
When the device is not being used, observe the following storage
conditions:
▶ Dry and protected from frost and heat
▶ In an upright position where it is protected from dust and direct
sunlight
▶ With a cover to protect it from invasive dust if necessary
▶ Place no further devices or objects on top of the device to prevent
it from being damaged.
If you do not use the device for an extended period of time, it must
be cleaned thoroughly after its last application and before recom-
missioning. Deposits and residues could lead to start-up difficulties.

ASSEMBLY AND INSTALLATION

Scope of delivery
▶ 1 x submerged clean water pump
▶ 1 x reducer for inner diameters 25mm and 32mm as well as for
1'' internal threads
▶ 1 x elbow
▶ 1 x manual
Unpacking the device
▶ Open the cardboard box and take the device out.
▶ Completely remove the packaging.
▶ Fully unwind the power cable. Make sure that the power cable is
not damaged and that you do not damage it during unwinding.
Instruction manual Ref. 08792