Controls And Connectors; Setting Up Your Dvd Player; Box Contents; General Connections - Packard Bell DVX 461 USB Guia Del Usuario

C C
ONTROLS AND
Please see the illustrations on the inside-front cover of this guide to
reference the following numbers.
Front Panel (see illustration A on the inside-front cover)
1. Power button 4. Open/Close but-
ton
2. VFD display
5. Play button
3. DVD disc holder
6. Pause button
Back Panel diagram (see illustration B on the inside-front
cover)
1. Coaxial output 5. Video output
2. Centre audio out- 6. YCb/PbCr/Pr
put (HDTV720P) out-
put
3. Left/right sur-
round audio out- 7. Scart output
put
8. Power cable
4. Left/right front input
audio output
Remote Control (see illustration C on the inside-front cover)
1. Power 10. Display
Mode
2. Numeric
Buttons 11. Zoom
3. Rewind 12. OSD
4. Fast For- 13. PBC
ward
14. L/R
5. Cursor Con-
15. Goto
trol
16. Select
6. Menu DVD
17. Transfer
7. Angle
8. Language
9. Repeat
S
ETTING UP YOUR

Box contents

1. Packard Bell DVX 461 USB DVD player
2. Remote control
3. Remote control Batteries
4. User's Guide & Service Guide

General Connections

Make sure that each device is turned off before connect-
ing.
DVD player and TV set
See also the Quickstart Setup section at the start of this guide.

Controls and Connectors

6 -
ONNECTORS
7. Stop button
8. USB connector
9. Optical output
10. Sub-woofer audio
output
11. S-video output
18. DVD/USB 25. Subtitle
19. Program 26. Setup
20. Sub Menu 27. Next
21. A-B 28. Previous
22. Mute 29. Pause, Stop,
Play
23. Random
30. Video Out
24. Vol +/-
31. Open/
Close
DVD
PLAYER
Depending on the connectors that are available on your
TV set, you may need additional cable(s). Please check
your TV's documentation for more information.
You may need to use the Video Out and DIsplay Mode
buttons to set the video output mode correctly.
DVD player and VCR
DVD player and Y Cb/Pb Cr/Pr or SCART
To connect to a TV using HDTV mode (with compatible TV only):
1. Connect the DVD player to your TV set using the Y Cb/Pb Cr/Pr
and YUV connectors.
2. Set the TV to HDTV mode (see your TV's user documentation for
how to do this).
3. Press the remote control Video Out button repeatedly to select
'CVBS+YUV'.
4. Press the 'Display Mode' button twice to switch to HDTV 720P
mode.
G F
ENERAL UNCTIONS
Screen display (OSD) - When the unit plays a disc, press the OSD
button to browse through several options.
For DVD discs - Press the OSD button repeatedly to show the
remaining time, elapsed time and chapter time.
Press once again to switch off the OSD display.
For DivX, XVID and MP3/WMA discs - Press the OSD button
repeatedly to show the elapsed time of a chapter and the remaining
chapter time.
Press once again to switch off the OSD display.
Language - Press the Language button to select any of the languages
supported on the disc.
Angle - If the disc you are playing supports this function, use this
button to select your preferred viewing angle.
Subtitles - Press the Subtitle button repeatedly to browse through the
available subtitle options.
Program - Use the Program button to program the playing sequence
using the numeric buttons. When finished, press the Stop button
to cancel or Play to start playback.
To cancel a program, press the PBC button.
Menu DVD - Press the Menu DVD button to view the available titles
on the disc. Select with the Up
buttons and press Play to start display.
Sub-menu - With PBC on (see below), press the Sub-menu button to
display the available options (only valid for discs with multi-menu).
When the unit is in PBC OFF or stop state, press this button to
activate the nine pictures browse function. Select the number you
wish to play.
Navigation buttons - These buttons are used to
browse through several menus.
Numeric buttons - To play a track directly, press
the corresponding number. Use the +10 button for
numbers above 9.
and Down