Nokia 6276 Manual Del Usuario página 79

S e t t i n g s
1. Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require when you make a calling card call. See your calling
card for instructions.
2. Press and hold the send key for a few seconds until Card call is displayed.
3. Follow the instructions on the screen.
4. When you hear the tone or system message, select OK.
International prefix
You can store an international dialing prefix into your device. In the standby mode,
select Menu > Settings > Call > International prefix. In the standby mode, when you
enter + (press * twice) at the beginning of a phone number, your device automatically
inserts the international dialing prefix that you have stored after you press the call
key. See "Insert dialing codes," p. 49.
Data or fax calls
Data and fax calling is a network service. See "Network services," p. 8. If your
network operator supports this feature, you can set up the device to send or receive
data and fax calls with a terminal, such as a PDA or PC, connected.
For better performance during data calls, place the device on a stationary surface.
Do not move the device or hold it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia website at http://www.nokia.com/us.
1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Rcvd.
data/fax call and one of the following options:
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
78