Stanley FATMAX KFMCD607 Manual Del Usuario página 9

Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage V
DC
No-load speed
Min
Max. torque Nm
Chuck capacity
mm
Max Drilling capacity
Steel/wood
mm
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
FMC689L
Voltage V
18
DC
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L ) 74 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 85 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
h, D
KFMCD607 H2
0-450/0-2000
-1
905998** 906086**
typ. 1 typ. 1
V
230 230
AC
V
18 18
DC
A 1 2
90 - 240 45 - 120
min
FMC687L FMC688L
18 18
2.0 4.0
Li-Ion Li-Ion
) 1.8 m/s , uncertainty (K) 1.5 m/s
2 2
(Original instructions)
Declaration of conformity
The Supply of Machinery (Safety)
Stanley Fat Max ddeclares that these products described
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
18
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
55
13
13/38
EC declaration of conformity
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with directives, 2014/30/EU and
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
Regulations 2008
Cordless Drill KFMCD607
2008/1597 (as amended).
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Stanley Fat Max.
Vice President Professional Power Tools
Stanley Fat Max UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
%
MACHINERY DIRECTIVE
Cordless Drill KFMCD607
2011/65/EU.
ENGLISH
Karl Evans
United Kingdom
30/12/2021
9