Costway TQ10006 Manual Del Usuario página 3

1、Car Body 1PC 2、Steering wheel 1PC
4.Wheel 4 PCS 5.Wheel Cap 4
7.J-shaped Stick 1PC 8.Rear Wheel Axle 1PC
10、Washer 5 PCS 11、Cotter Pin 4 PCS
(1 replacement piece)
(1 replacement piece)
1.Place the anti-tumble 2.Insert the rear wheel axle
shelf into the rear of the through washer,wheel,
body. plastic ring into the
body,tighten using a cotter
pin.
3.Backrest 1PC
PCS 6.Anti-tumble Shelf 1PC
9.Ring 4PCS
3.Assemble the two front
wheels,insert the plastic
ring,wheel and washer,
tighten using two cotter
pins.
04
4.Place the four wheel caps onto
the four wheels.
6.Loosen the bolt and nut in the
steering wheel first,then place the
steering wheel over the J-shaped
stick,insert the bolt and tighten the
nut with a screwdriver.
5.Install the J-shaped stick at the
assigned location as picture.
7.Insert the backrest over the
hole in the rear of the body,be
certain the backrest is
completely seated.
Trun over the car body,and find the battery house.
Loosen the screws with a screwdriver.
Put 2 AA batteries in the battery house,then tight the screw
with a screwdriver.
05