Tabla de contenido
11. This appliance is designed for domestic use only; when used
for industrial purposes outside the product's specifications,
or used not in accordance with the instructions, no liability
is assumed and the warranty is nullified.
12. Never use the kettle if the supply cord is damaged. If found
damaged in any way, consult the producer's authorized
service centre. The list of service centres is to be found in the
appendix and on www.eldom.eu.
13. Any modernizations or the use of non-original spare parts or
components of the appliance are prohibited and may cause
a serious hazard to the user,
14. The company Eldom sp. z o. o. shall bear no responsibility
for any possible damages resulting from the improper usage
of the appliance.Any mending of the device should be held
by authorised service providers. Any modernisations or
using spare parts or other elements other than original is
forbidden and dangerous.
8|EN
GENERAL DESCRIPTION
1. On/off switch
2. Lid release button
3. Opening lid
4. Spout + net filter
5. Base
6. Water level indicator
7. Handle
TECHNICAL DATA
- power: 2000W
- mains voltage: 230V ~ 50Hz
- 1,7 litre capacity
HOW TO USE THE APPLIANCE
Cordless kettle C230 is for boiling water.
It is possible to boil 0.6 – 1.7 litre of water in the kettle.
The kettle base (5) must be put on a flat and dry surface. In the base there is some space
for an excess cord. It is important for the cord to be led from the base (5) through a special
groove so that the appliance could be stable.
Before using the kettle for the first time fill it up (2-3 times) with water, boil the water and
then empty the kettle.
The kettle can be filled with water directly through the spout (4) or after opening the lid
(3). In order to open the lid (3) you must press the button (2).
The kettle must not be filled up when on the base.
The minimum level of boiling water is 0.6 l. The maximum water level (1.7 l) is marked on
the indicator (6).
The kettle starts working after putting the switch (1) in the position 'I' .
The kettle working is signalled by the control lamp.
The kettle switches off automatically after the water has boiled.
You can stop heating water at any time by putting the switch (1) in the position '0' .
INSTRUCTION MANUAL
CORDLESS KETTLE C230
2
3
4
6
5
EN
1
7
EN|9
Tabla de contenido
