General Description; Technical Data - Eldom lana SE10 Manual De Instrucciones

GENERAL DESCRIPTION

1. Housing
2. LCD
3. Decrease temperature (+)
4. Increase temperature (-)
5. On/off switch
6. Straightening and brushing
piece

TECHNICAL DATA

- power: 45W
- supply voltage: 230V ~50Hz
The electric hair brush is used for straightening and combing hair. The brush gives shine
and smoothness to puffy or curly hair. The housing (1) of the brush is made of material
resistant to high temperatures and the pins have anti-burning tips. By choosing the
appropriate temperature, one can use the brush with thin, normal and thick or curly hair.
CAUTION!
Do not use the brush for artificial hair or for grooming animals. Do not keep the brush in
the same spot for longer than 20 seconds.
Before using the brush, wash the hair and comb it thoroughly.
For best results, do not brush too much hair at once.
OPERATION
To switch on the appliance, press and hold the (5) button for approximately 2 seconds,
then select the appropriate temperature depending on the type of hair. The temperature
can be adjusted in steps of 5oC by pressing (+) and (-) – increase temperature (4) and
decrease temperature (3). The default temperature is 180oC
- fragile/thin/dyed hair – 170-190oC (selecting low temperature may increase the
duration of hair straightening)
- normal hair 200-210oC
- dense/thick/curly hair 210-230oC
When hair straightening is completed, switch off the appliance by pressing the (5) button
and holding it for about 2s, then disconnect the appliance from the mains by pulling the
plug. Do not pull the cord. Wait for the appliance to cool down before putting it away for
INSTRUCTION MANUAL
ELECTRIC HAIR BRUSH SE10
1
6
2
5
4
3
EN
EN|9