Scales Operation; "Tare" Function - Termozeta bilancina elite 420010 Libro De Instrucciones

INSTRUCTIONS FOR USE

SCALES OPERATION

• Rest the scales on a flat and stable
surface.
• Place the bowl (1) (if used) on the scales
before turning on the appliance.
• Press and release the ON/OFF- TARE
key (e) to turn on the appliance.
When the appliance is turned on,
the display appears as shown in the
picture beside. After about 3 seconds,
the value "0" is displayed and the scales
are ready to weigh.
• Proceed with the weighing operation.
SUGGESTIONS
Any container can be used for weighing operations or it is also possible to rest the weight directly
on the scales plate (4).
In case you are using a container, remember to position it on the scales plate (4) before turning on
the appliance so that the weight reference will be zero when the appliance is turned on.
WEIGHT UNIT CONVERSION
The scales include both metric (kilograms, grams) and Imperial systems (pounds, onces).
You can press the D/GB key (d) set metric or imperial units.

"TARE" FUNCTION

To weigh different loads consecutively without removing them from thebowl (1) or from the
scales plate (5), put the first load on the plate and read the weight. Press the TARE key (b) to
reset the reading of the display (c) before adding the next load. It is possible to repeat this
operation. It is possible to use the "TARE" function also to reset the weight of a container. In
this case, turn the scales on, put an empty container on the scales plate (5) and press the TARE
key (a). The display is reset and, once the food has been placed on the scales, will show its
weight.
ENGLISH
a
e
c
g