Bosch PST Universal Manual Original página 14

OBJ_BUCH-2499-003.book Page 14 Wednesday, January 20, 2016 9:27 AM
14 | English
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Lock-on button for On/Off switch
2 On/Off switch
3 Vacuum hose*
4 Vacuum connection
5 Saw blade storage (PST Universal
6 Base plate
7 Adjusting lever for orbital action
8 Switch for sawdust blowing device
9 Dust cover for vacuuming (PST Universal
10 "Cut Control" base (PST Universal
11 "Cut Control" viewing window (PST Universal
Technical Data
Jigsaw
Article number
"Cut Control"
Stroke rate control
Orbital action
Rated power input
Output power
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 85 dB(A); Sound power level 96 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Cutting board: a =13 m/s , K=3 m/s
h
2
Cutting sheet metal: a =7 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
1 609 92A 1PS | (20.1.16)
12 Handle (insulated gripping surface)
13 Saw blade holder
14 Guide roller
15 Saw blade*
16 Splinter guard*
17 Accessory holder
18 Contact protector
19 Screw
+
)
20 Scale for mitre angle
21 Cutting mark, 0°
22 Cutting mark, 45°
*Accessories shown or described are not part of the standard de-
+
)
livery scope of the product. A complete overview of accessories
+
)
can be found in our accessories program.
+
)
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
2
,
terns.
2
.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-11, EN 50581.
PST Universal PST Universal
3 603 CA0 5.. 3 603 CA0 1..
–


W 530
W 290
-1
min 500–3000 500–3000
mm 20
mm 75
mm 12
mm 5
° 45
kg 1.9
/II
Bosch Power Tools
+



530
290
20
80
12
5
45
1.9
/II