Indicators - Vimar ELVOX Due Fili Plus 41001 Serie Instrucciones Instalador

41001 - 41002 - 41003 - 41004

Indicators

Below we describe the characteristics of the LEDs used in the
phases of both configuration and normal operation.
LED
At the top right of the speech units there are three LEDs with the
following meanings starting from top to bottom:
LED Meaning
green LED:
- on -> communication indicator on,
- blinking -> call in progress indicator (0.5 sec on,
0.5 sec off, cycle 1 s).
Green indicator LED,
on -> during lock operation.
Red LED: flashing in case of lost communication
- on -> signalling Bus busy
- blinking -> signalling lost communication
Red LED :
Situation
Attempt to call with BUS
busy
Call to indoor unit with
chime off
Call to busy indoor unit
The called indoor unit
does not exist
Secondary ID assignment
with parent > 50
In the other states the LEDs are off.
On Period Duration
(s) (s) (s)
0.1 0.2 2
0.1 0.2 5
0.2 0.4 5
0.1 0.2 1
0.1 0.2 1
White LEDs:
Situation
The chosen configuration
has a value that is not
among the standard ones
(it has been changed with
SaveProg)
Resetting to the factory
configuration value is in
progress
Indoor unit automatic ID
assignment input, waiting to
choose from which button
to start
The speech unit is searching
to check whether there is
another one with the same ID
Waiting to check whether
there is another speech unit
with the same ID
Pushbutton remapping
Waiting for ordering modules
Art. 41010
The situation of remaining in bootloader lasts 10 s from entry. It
exits automatically if the update is not started. The situation is
indicated by a single white LED coming on, the one at bottom
right, at the same time as the green LED signalling active com-
munication/ongoing call.
EN
On Period
(s) (s)
0.1 0.5
0.1 0.2
0.5 1
0.25 1
0.25
Note: They are
each offset by
1
0.25 s and thus
appear to rotate
clockwise
The LED paired
with the button
N.O.
to be remapped
remains lit steady
0.5 1
29