Laser Accessories
Recommended accessories for use with your tool are available for
purchase at your factory-owned local service center.
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk
of injury, only D
WALT, recommended accessories should be used
E
with this product.
If you need assistance in locating any accessory, please contact
D
WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD
E
21286, call 1-800-4-D
WALT (1-800-433-9258) or visit our website
E
www.dewalt.com
Laser Enhancement Glasses
Some laser kits include a pair of
Laser En hancement Glasses (Fig. 6).
These red lens glasses improve the
visibility of the laser beam under
bright light conditions or over long
distances when the laser is used for
interior applications. These glasses
are not required to operate the laser.
CAUTION: These glasses are not ANSI approved safety glasses
and should not be worn while operating other tools. These glasses
do not keep the laser beam from entering your eyes.
DANGER: TO REDUCE THE RISK OF SERIOUS PERSONAL
INJURY, NEVER STARE DIRECTLY INTO THE LASER BEAM,
WITH OR WITHOUT THESE GLASSES.
Target Card
Some laser kits include a Laser Target Card (Fig. 7) to aid in locating
and marking the laser beam. The target card enhances the visibility
of the laser beam as the beam crosses over the card. The card is
marked with standard and metric scales. The laser
beam passes through the red plastic and reflects
off of the reflective tape on the reverse side. The
magnet at the top of the card is designed to hold
the target card to ceiling track or steel studs to
determine plumb and level positions. For best
performance when using the Target Card, the
D
E
Digital Laser Detector:
DW0772 (Fig. 8–10)
Some laser kits include a D
D
E
emitted by a rotary laser in bright light conditions or over long
distances. The detector can be used in both indoor and outdoor
FIG. 6
situations where it is difficult to see the laser beam.
15
WALT logo should be facing you.
WALT Digital Laser Detector. The
E
WALT Digital Laser Detector allows you to locate a laser beam
FIG. 8
DD
V
X
FIG. 7
U
Z
AA
W