ENGLISH
Description and use
VORT JET-A and VORT JET-AR Type Axial fans are used in general ventilation projects and in smoke exhaust fan carpark
ventilation. The Axial fans may not be used in areas in which an explosion-capable atmosphere can be found. The motor
is found combined with the impeller in canals where the air circulation actualized and the air flowing is actualized by the
way of impeller. The fan cannot be installed outside without water precaution.
These devices have been designed for use in commercial and industrial environments.
Handling and storage
The fans are delivered on wooden pallets wrapped in plastic stretch. Transport the fan to the place of assembly in its original
packaging. During transport, connection cables, terminal box and wire connections mustn't be damaged. Load and unload
the fan carefully, in order to avoid possible damage. Use suitable lifting equipment. The fan should be stored in a safe, clean,
dry, vibration free, location. A regular monthly rapid spin of the impeller is recommended to prevent grease hardening and
possible brinelling of the bearings; the impeller should not be in the same angular position after rotation.
When dismantling the crate to gain access to the fan assembly care should be taken to avoid injury from sharp edges, nails,
staples, splinters, etc.
Safety
Warning:
this symbol indicates that care must
be taken to avoid injury to the user
• Follow the safety instructions to prevent any harm to the user.
• Do not use this appliance for purposes other than those described in this manual.
• Having removed the appliance from its packaging, make certain that it is intact and undamaged. If in doubt, consult a pro-
fessional or contact an authorized Vortice Service Centre.
• Do not leave packaging within reach of children or individuals with disabilities.
• Do not use this fan in explosive and corrosive environment.
• Store the appliance out of the reach of children and differently able persons after deciding to disconnect it from the power
supply and use it no more.
• Responsibility of the defects which can be occured as a result of unauthorized personnel intervention to fan or to be used
non-original spare parts belongs to the installer.
This appliance can be used by children no less than 8 years of age and by individuals with limited phy-
•
sical, sensory or mental capacities, or by inexperienced or untrained individuals, provided that they
are supervised or have been instructed in safe use of the appliance and understand the associated
risks. Children must not play with the appliance. Cleaning and maintenance procedures - for which the
user is responsible - must not be carried out by children unless supervised.
Caution:
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make modifications of any kind to this appliance.
• The maintenance instructions must be followed to ensure the appliance does not suffer damage and/or excessive wear.
• The inside of the appliance must be cleaned only by a skilled professional.
• Inspect the appliance periodically for visible defects. If the appliance is defective in any way, do not use it; contact a Vortice
authorized Technical Support Centre without delay.
• If the appliance does not function correctly or develops a fault, contact a Vortice authorized Technical Support Centre
without delay. Ensure that only genuine original Vortice spares are used for any repairs.
• Connect the appliance to the electrical power supply/socket only if the rated power of the supply is compatible with the
maximum rated power of the appliance. If not, contact a professional electrician without delay.
The electrical system to which the appliance is connected must comply with current regulations.
•
The appliance must be installed by a professionally qualified technician.
•
The appliance must be wired to the power supply by way of a multi-pole isolating switch with a gap
•
of at least 3 mm between contacts.
9