Campbell Hausfeld CHN10302 Instrucciones De Operación
Ocultar thumbs Ver también para CHN10302:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . 1
Unpacking . . . . . . . . . . . . . . . . . . . . . . 1
Safety Guidelines . . . . . . . . . . . . . . . . 1
Specifications. . . . . . . . . . . . . . . . . . . . 2
Operating Instructions . . . . . . . . . . . . 4
Lubrication . . . . . . . . . . . . . . . . . . . . 4
Recommended Hookup. . . . . . . . . . 4
Operational Mode . . . . . . . . . . . . . . 5
Single Sequential Mode . . . . . . . . . 5
of the Exhaust . . . . . . . . . . . . . . . . . 5
Technical Service . . . . . . . . . . . . . . . 6
Tool Repair . . . . . . . . . . . . . . . . . . . . 6
Fastener and Interchange
Information . . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting Chart . . . . . . . . . . . . 7
Warranty . . . . . . . . . . . . . . . . . . . . . . . 8

Description

This stapler is designed for cabinetry,
casebacks, decorative trim and crafts.
Features include: no-mar tip, adjustable
exhaust, single sequential trigger, quick
clear nose, and an adjustable depth of
drive mechanism.
Campbell Hausfeld Nailers meet or exceed Industries' Standards as set forth by the American
National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
SNT-101-2002.
© 2010 Campbell Hausfeld/Scott Fetzer

Unpacking

After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.

Safety Guidelines

This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
should always be followed, including
the following:
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Narrow Crown Stapler
Models CHN10302, CHN10310
Danger indicates
an imminently
Locate model and date code on
tool and record below:
Warning indicates
Model No.: _____________________
a potentially
Date Code: _____________________
Caution indicates
a potentially
CALIFORNIA PROPOSITION 65
Notice indicates
important
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
When using tools,
masonry. This dust often contains
basic precautions
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
CHN10302, CHN10310
Retain these numbers for
future reference.
This product or
its power cord may
IN700502AV 3/10
Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld CHN10302

  • Página 17: Descripción

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. Las clavadoras de Campbell Hausfeld cumplen o exceden los estándares de la Industria IN700502AV 3/10 establecidos en los códigos SNT-101-2002 de las organizaciones norteamericanas ANSI/ISANTA.
  • Página 18: Componentes Y Especificaciones De La Herramienta

    Campbell Hausfeld si tiene alguna La exposición prolongada Un momento de desatención pregunta. a ruido de alta intensidad mientras hace funcionar la puede causar pérdida de...
  • Página 19 CHN10302, CHN10310 Manual de Instrucciones de Operación Instrucciones de Seguridad h. Use únicamente los clavos Nunca detallados en la sección Accesorios ponga Importantes (Cont.) las manos ni ninguna otra de este manual. Los sujetadores Siempre colóquese parte del cuerpo en el área de no identificados por el fabricante en una posición...
  • Página 20: Instrucciones De Funcionamiento

    CHN10302, CHN10310 Manual de Instrucciones de Operación Instrucciones de seguridad herramienta. Tales gases puede 2. Gire la herramienta de explotar y causar graves lesiones modo que la entrada importantes (Continúa) personales. de aire quede mirando SERvICIO hacia arriba. Agregue No use a.
  • Página 21: Modeo De Operación

    CHN10302, CHN10310 Manual de Instrucciones de Operación Instrucciones de 2. Saque todos los clavos del cargador 2. Empuje hacia (Vea la Sección Carga-Descarga). abajo sobre el Funcionamiento (Cont.) boton del seguro. Use mangueras de aire de 9,5 mm Mueva la tapa del...
  • Página 22: Para Ajustar La Direccion Del Tubo De Escape

    Información de intercambio Las grapas usadas con la grapadora para acabado CHN10302 también se pueden usar con las grapadoras : Senco LN4450, SJS-LR, SKS L11-15, Hitachi N3804A, Duofast BN-1832S, KN-1848, ST-18, Stan-Tech SDS 18-14, Atro Minor 90/30, 90/32, 90/40, y Porter Cable NS100.
  • Página 23: Guía De Diagnóstico De Averías

    CHN10302, CHN10310 Manual de Instrucciones de Operación Guía de Diagnóstico de Averías Deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico calificado personal de un centro autorizado de servicio.
  • Página 24: Garantía Limitada

    8. RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA: A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto. B. Llame a Campbell Hausfeld (800) 543-6400 por sus opciones de servicio incluidas en la garantía. Los costos de flete correrán por cuenta del comprador.

Este manual también es adecuado para:

Chn10310

Tabla de contenido