Package Contents - BGS technic 3243 Manual De Instrucciones

Pistola nuemática de arenado con accesorios
Ocultar thumbs Ver también para 3243:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT NOTES ON PERSONAL SAFETY
• Operate the tool using common sense.
• Do not wear loose clothing or jewellery that can caught by moving parts and cause serious
injury.
• Only operate the tool at a safe distance from yourself and other persons
• Always ensure a firm foothold in order to be able to maintain your balance at all times.
• Never reach through or over electric cable or air hoses.
• Always work with a second person present; in event of an accident, this person can call for help
or medical assistance.
• Do not use this tool if you are under the influence of medication, alcohol or drugs, or if you are
tired. Read the package insert of your medicine in order to rule out an impairment of your
judgement or reflexes.
• Do not use the device if there is any doubt about the functionality of this tool.
• Always stay aware. During work, observe your workplace and carry out work with utmost care.
• Before use, check the tool for damage. If a part is damaged, use the tool again only after all
damaged parts have been repaired by an authorised specialist.
OCCUPATIONAL SAFETY
Always wear suitable protective equipment when using pneumatic tools.
Always wear anti-slip safety shoes,
work gloves, approved safety glasses
and approved dust mask
if you with this air tool.
RECOMMENDED COMPRESSED AIR SYSTEM
No.
1
Air tool
2
Air hose
3
Quick coupling
Oiler
4
(for tools with motor)
5
Pressure reducer
Note: This product must be operated with compressed air that is clean, oil-free, moisture-free and at a
maximum pressure of 6.2 bar. To regulate the pressure of compressed air supply, a pressure
regulator should be used. We recommended to use air dryer and filter for best sandblasting results.

PACKAGE CONTENTS

1 air-driven sandblasting gun
1 wide-angle attachment
1 spot attachment
1 edge attachment
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Description
Tel.: 02196 720480
Fax.: 02196 7204820
No.
Description
6
Drainage/filtering unit
7
Drainage valve
8
Shut-off valve
9
Dryer/filter unit
10
Compressor
1 inner corner attachment
1 collecting bag for sandblasting material
1 screw clamp
2 kg blasting material
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
loading

Tabla de contenido