Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RECOMMENDED COMPRESSED AIR SYSTEM
No.
1
Air tool
2
Air hose
3
Quick coupling
Oiler
4
(for tools with motor)
5
Pressure reducer
Note: This product must be operated with compressed air that is clean, oil-free, moisture-free and at a
maximum pressure of 6.2 bar. To regulate the pressure of compressed air supply, a pressure
regulator should be used. We recommended to use air dryer and filter for best sandblasting results.
PACKAGE CONTENTS
1 air-driven sandblasting gun
1 wide-angle attachment
1 spot attachment
1 edge attachment
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
ENVIRONMENTAL PROTECTION
Dispose of this product at the end of its working life environmentally.
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment. Contact your local solid waste
authority for recycling information
MAINTENANCE
Always disconnect the device from the compressed air supply before cleaning, maintaining or
repairing. Clean the pneumatic sandblaster (1) and the sandblasting material tank (8) after completing
your work. Use compressed air to blow through the pneumatic sandblaster (1) and the sandblasting
material tank (8). Always store the pneumatic sandblaster in a dry place.
SAFETY WHILE OPERATING
Take enough time for a careful selection of a working area. Take care that your workplace is near to
the compressor and blasting material. Attention! Always stay aware. Remove the device or other
objects from the working area. Persons and animals must not remain in the working area. Never
direct the air tool against persons or animals. Always wear safety equipment like safety glasses and
dust masks when working with this air tool (see chapter "Occupational Safety").
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Description
Tel.: 02196 720480
Fax.: 02196 7204820
No.
Description
6
Drainage/filtering unit
7
Drainage valve
8
Shut-off valve
9
Dryer/filter unit
10
Compressor
1 inner corner attachment
1 collecting bag for sandblasting material
1 screw clamp
2 kg blasting material
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
