End Of Use; Maintenance; Troubleshooting - Imetec INTELLIVAPOR K1 Instrucciones Para El Uso

Press the super-steam button (3)
(curtains, hung clothes, etc.) [Fig. E].
Stop using super-steam button (3)
and start ironing again when it goes off.
SPRAY FUNCTION
Verify that there is water in the reservoir (11).
Press the spray button (2) slowly for dense spray or quickly for mist [Fig. F].
Dampen delicate fabric using the spray function or before ironing or alternatively,
lay a damp cloth between the fabric an the iron. Do not use the spray function on
silk or synthetics.
EMPTYING PROCESS
Set the switch O/I (10) on position "O" to switch the iron off.
Disconnect the plug (12) from the socket.
Open the latch (5).
Empty the reservoir (11) by turning the iron upside down and shaking it lightly.
Let the iron cool down completely.
Always set the iron upright.
NOTE: If the appliance is not to be used for several weeks, wait for the appliance to cool
down compltely before emptying the water reservoir completely, according to the
instructions in the relevant chapter. When the appliance is switched on again, refill the
reservoir as indicated in the relevant chapter.
CLEANING
WARNING! Make sure the plug of the appliance is
disconnected from the socket and the plate has
cooled down completely before cleaning the iron.
Any starch deposits or residue on the surface of the plate can be removed with a damp cloth
and non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plastic parts can be cleaned with a damp cloth and then wiped with a dry cloth.
This chapter describes the most common problems that can arise using the appliance. If
the problems cannot be solved with the information below, please contact the Authorised
Assistance Centre.
intermittently to iron even in an upright direction
when the plate temperature LED (1) goes on

END OF USE

MAINTENANCE

TROUBLESHOOTING

EN
15