End Of Use; Maintenance; Storing And Caring For The Product - Imetec Titanox K113 Instrucciones De Uso

SUPER-STEAM AND VERTICAL STEAM
Press the super-steam button (4) to generate a strong shot of steam that is able to penetrate
the fabric and remove the most difficult creases.
Wait a few seconds between each pressing action of the iron [Fig. E].
Press the super-steam button (4) intermittently to iron even in an upright direction (curtains,
hung clothes, etc.) [Fig. F].
The super-steam function can only be used at high temperatures. Stop using the button (4)
when the plate temperature LED (1) lights up and start ironing again only when this goes off.
SPRAY FUNCTION
Verify that there is water in the reservoir (10).
Press the spray button (3) slowly for dense spray or quickly for mist [Fig. G].
Dampen delicate fabric using the spray function or alternatively, lay a damp cloth between
the fabric and the iron. Do not use the spray function on silk or synthetics.
EMPTYING PROCESS
Disconnect the plug (12) from the socket.
Open the latch (6).
Empty the reservoir (11) by turning the iron upside down and shaking it lightly.
Let the iron cool down completely.
Always set the iron upright.
NOTE: If the appliance is not to be used for several weeks, wait for the appliance to cool
down completely before emptying the water resevoir completely according to the
instructions in the relevant chapter. When the appliance is switched on again, refill the
reservoir as indicated in the relevant chapter.
CLEANING
WARNING! Make sure the plug of the appliance is
disconnected from the socket and the plate has
cooled down completely before cleaning the iron.
Any starch deposits or residue on the surface of the plate can be removed with a damp cloth
and non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plastic parts can be cleaned with a damp cloth and then wiped with a dry cloth.

STORING AND CARING FOR THE PRODUCT

WARNING! Once you have finished using this
appliance, make sure it has cooled down completely
before putting it away.

END OF USE

MAINTENANCE

EN
15