Imetec INTELLIVAPOR K1 Instrucciones Para El Uso página 16

Set the O/I switch (10) on position "l" to switch the iron on
The plate temperature LED (1) switches on to indicate that the iron is
warming up.
Wait for the plate temperature LED (1) to go off before starting to iron.
EN
Intellivapor Technology
This steam iron is equipped with "IntelliVapor" technology, which allows you to iron any type
of fabric without having to adjust the plate temperature.
Fabrics with the following symbols may be ironed:
Fabrics with the following symbols may not be ironed:
It is recommended to place a cloth between the iron and the fabric when using the iron for
the first time.
Before starting ironing, direct a jet of steam onto the cloth by lifting the iron slightly so that
any residual condensation comes out.
ECO FUNCTION
The appliance is equipped with new technology that optimises steam production, thereby
reducing energy consumption.
Set the steam selector (4) to ECO to activate the function.
IRONING WITHOUT STEAM (DRY)
Follow the instructions in the "steam ironing" section, leaving the steam selector (4) set to
"0".
IRONING WITH STEAM
Select the amount of steam via the steam selector (4).
Move the steam selector (4) to any position between minimum and maximum according to
the desired amount.
Continuous steam will only be dispensed when the iron is in a horizontal position.
This stops when the iron is set upright or the steam selector (4) is set to 0.
The plate temperature LED (1) flashes intermittently while ironing, thereby indicating
that the temperature is maintened.
SUPER-STEAM AND VERTICAL STEAM
Press the super-steam button (3)
penetrate the fabric and remove the most difficult creases.
Wait a few seconds between each pressing action of the iron [Fig. D].
14
synthetic fibres e.g. viscose, polyesther
silk, wool
cotton, linen
synthetic fibres e.g. viscose, polyesther
to generate a strong shot of steam that is able to