Self-Cleaning Function - Mellerware VAPOUR Manual De Instrucciones

Self-cleaning function:

• It is important to self-clean the appliance at least
once a month to remove calcium and any other
built-up minerals inside the iron.
• Fill the depository to its maximum level, as indi-
cated on "water fill" section.
• Place the iron in a vertical position, plug in to the
mains and select the maximum temperature.
• Leave the appliance to heat up until the pilot
light indicates that it has reached its consigned
temperature.
• Unplug the appliance and place in the sink.
• Press the self-clean button, and keep it pressed
down.
• Let the water flow out through the steam vents in
the base, while lightly shaking the appliance.
• Release the button after a minute or when the tank
becomes empty.
• Leave the iron in the vertical position until it has
cooled.
5. Anomalies and repair
5.1. Take the appliance to an authorised support centre
if product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.