Placing The Speakers - Yamaha Soavo-900M El Manual Del Propietario

Place the speakers on a sturdy, vibration-free surface, on a
well-built stand.
■ Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers
are slightly angled in towards the listeners.
■ Using as front speakers in a multi channel
system
Position the speakers on both sides of the TV. The
positioning of speakers is important, because it controls the
whole sound quality of a multi channel system. Set up the
speakers on the basis of your listening position by following
the owner's manual supplied with your amplifier.
■ Using as presence or surround speakers
Place the speakers on a shelf etc. Determine the best
position by following the owner's manual supplied with your
amplifier.
Soavo-900M
Presence
Center
Soavo-900M
Front
Note
This speaker features a magnetically shielded design,
but there is still a chance that placing it too close to a
TV set might impair picture color or create a buzzing
noise. Should this happen, move the speaker away
from the TV set.
2
En

PLACING THE SPEAKERS

Subwoofer
Soavo-900M
Surround
When hanging on a wall
You can hang the speaker on a wall using a
commercially available bracket and screws.
WARNING
• This speaker weighs 6.0 kg (13.4 lbs.). Do not
mount it on thin plywood or a wall with soft
surface material. If mounted, the screws may come
out of the flimsy surface and the speaker may fall.
This damages the speaker or causes personal
injury.
• Do not install the speaker to a wall with nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause it to fall.
• To avoid accidents resulting from tripping over
loose speaker cable, fix it to the wall.
Safety wire bracket
Use to attach a safety wire
after mounting the speaker
bracket.
Screw holes
Diameter: 6 mm (7/32")
Hole depth: 15 mm (9/16")
60 mm
(2-11/32")