English - Braun Tribute FX 3030 Manual Del Usuario

English

Our products are engineered to meet the
highest standards of Quality, functionality
and design. We hope you thoroughly
enjoy your new Braun appliance.
Please read the use instruc tions
carefully before first use.
Important
• This appliance shall not be used by
children. Keep the appliance and
its cord out of reach of children.
Switch off the appliance and discon-
nect from supply before changing
accessories or approaching parts
that move in use.
• This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given super-
vision or instruction concerning
use of the appliance in a safe
way and if they understand the
hazards involved.
• The blades l/n are very
sharp! Take hold of the
blades by the knob only. After use,
always first remove the blades from
the bowls 7/j before removing
the processed food.
• Make sure that your voltage corre-
sponds to the voltage printed on the
bottom of the appliance. Connect
to alternating current only.
• This appliance was constructed for
household use only to process the
listed quantities.
• Do not use any parts in the micro-
wave oven.
• Make sure to avoid touching the
running drives with your fingers. Put
on the protective cover m whenever
a drive place is not in use, since
both drives rotate simultaneously
when switching on the appliance.
• Do not allow the appliance to
operate unsupervised.
• Braun electric appliances meet
appli ca ble safety standards.
Repairs or the replacement of the
mains cord must only be done by
authorised service personnel.
Faulty, unqualified repair work
may cause considerable hazards
to the user.
• Always disconnect the appliance
from the supply if it is left unat-
tended and before assembling,
disassembling or cleaning.
Specifications
• Voltage/wattage: See typeplate on
the bottom of the appliance.
• Operating time and max. capacity:
See processing instructions.
5722010074_FX3030_S06-140.indd 11
Description
The Braun food processor FX 3030
with the 2-bowl system meets highest
demands for kneading, mixing, blending,
chopping, slicing, shredding and grating,
both simply and quickly.
To obtain best results, two different
working bowls are available: a large
food processor bowl 7 and a small
chopper bowl j.
Thus, for chopping, puréeing or mixing
you can choose between the large and
the small working bowl. Moreover, you
can use the small bowl to prepare the
food which then can be further pro ces-
sed in the large bowl (e.g. to chop nuts
for a nut cake dough). Only one bowl
can be operated at a time.
1 Motor block
2 Cord storage
3 Motor switch (on = «I», off = «O»)
4 Pulse mode « »
5 Variable speed regulator (1-15)
6 Safety lock (avoids simultaneous
operation of both working bowls)
7 Food processor bowl (2 l capacity)
8 Lid for food processor bowl 7
9 Pusher for lid 8
j Chopper/mixer bowl for small
tquanti ties (0.75 l capacity)
q Lid for chopper bowl j
Seal ring for lid q
ß
11a
l Blade for chopper bowl j
m Protective cover for motor drive
when bowl has been taken off
Attachments for food processor
bowl 7
n Blade for food processor bowl 7 with
protective cover
o Insert carrier
p Fine slicing insert – a
q Coarse slicing insert – b
r Fine shredding insert – c
s Coarse shredding insert – d
t Grating insert – e
u French-fries system
v Kneading hook
w Whipping attachment
x Citrus press
y Juice extractor/fine grating
attachment
Note: Before using the food processor
for the first time, clean all parts as
described under «Cleaning».
Overload protection
In order to avoid damages caused by
overload, this appliance is equipped with
an automatic security switch which
shuts off the current supply if necessary.
In such case, turn the motor switch 3
back to «O» and wait approx. 15 min-
utes to allow the motor to cool off before
switching on the appliance again.
Pulse mode « »
The pulse 4 mode is for example useful
for the following applications:
• Chopping delicate and soft food, e.g.,
eggs, onions or parsley.
• Carefully folding flour into dough or
batter to maintain the creaminess.
• Adding whipped eggs or cream to
more solid food.
The pulse mode « » is activated by
turning the motor switch to the left.
The switch does not catch at this
setting. Hold the switch in pulse
position or turn it to pulse position
repeatedly.
Before activating the pulse mode, set
the desired speed with the speed regu-
lator 5. When releasing the pulse mode,
the appliance is switched off.
Recommended speed ranges
for individual attach ments
Set the speed range by means of the
variable speed regulator 5. It is recom-
mended to first select the speed and
then switch on the appliance in order to
work with the desired speed right from
the beginning.
Attachments Speed range
Kneading hook 7
Blade l and n 6 - 15
Whipping attachment:
– egg-whites 4 - 5
– cream 2
Slicing, grating and
shredding inserts 1 - 8
French-fries system 1 - 2
(please also refer to product printing)
Working with the 2-bowl
system
Only one working bowl can be
operated at a time.
The working bowl which is not used
must be in the upper position or addi-
tionally, can be turned in the «click»
direction where it is locked in place.
When the arrow markings are aligned,
the bowl can be taken off. For safety
reasons, always put the protective cover
m onto the free drive shaft after a bowl
has been taken off.
Double safety feature
The appliance can only be switched on
when the desired working bowl with lid
is properly engaged. If the lid is opened
during operation, the motor switches off
automatically. As in this case the motor
switch 3 is still on «I», turn it back to
«O» to avoid switching on the motor
accidentally.
11
05.02.14 09:14