Becken BTE3511 Manual De Instrucciones página 11

1. Drill the holes according to the instructions of fig. 2.
2. Place the tubes into the wall holes.
3. Set up grips with screws (fig. 4).
4. Place the T. Emitter on the upper grips.
5. Place the down grips to maintain the appliance against the wall.
6. Fix the grips down with screws.
CAUTION: Before starting the appliance, make sure it is correctly
mounted to the wall. Technical problems may occur if it is not parallel
to the floor.
Control panel and LCD screen
Control panel:
There is a total of 5 buttons on the control panel:
Power standby switch
Date and time settings; Timer settings; Working mode change
Select operating mode; Set programme;
Increase
Decrease
AF Manual Instruções Emissor Térmico 1500W Mod.BTE3511 A5 EN.indd 11
Tubes Screws Grips
Wall
Grips
Fig. 4
Ceramic Radiator | Emisor Térmico | Emissor Térmico
EN
11
29/05/2018 19:06