Before Use; Operation - cecotec Rock&Water 2500 Manual De Instrucciones

Ocultar thumbs Ver también para Rock&Water 2500:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
ENGLISH
• On soft surfaces (such as carpets) or where it may tip over during use.
• Outdoors or in areas with high humidity levels.
• Near or below flammable materials (such as curtains, cloths, wall hangings, tea towels, etc.)
or under wall cabinets.
• Cleaning and maintenance must be carried out according to this instruction manual to make
sure it functions properly. Turn off and unplug the appliance before moving and cleaning it.
Allow it to cool down completely before cleaning and storing it.
• Cleaning and maintenance tasks must not be carried out by children.
• The temperature of accessible surfaces may be high while in use and could cause burns. Do
not touch hot surfaces while in use or immediately after. Use its handles.
• Store the appliance and its instruction manual in a safe and dry place when not in use.
• No liability is accepted for any eventual damage or personal injuries derived from misuse or
non-compliance with this instruction manual.

2. BEFORE USE

• This product has been packaged to protect it against transportation damage. Unpack the
appliance and keep the original packaging carton and materials in a safe place. It will help
prevent any damage if the product needs to be transported in the future. In case the original
packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Clean the cooking plate with a wet sponge or cloth.
• Dry it with a cloth or paper towel.
• For best results, lightly coat the cooking plate with a bit of cooking oil or cooking spray.
NOTE: you may notice a slight burning smell or smoke when using the grill for the first time,
caused by the excess of lubricants from the manufacturing process. This does not affect the
safety of your appliance.

3. OPERATION

1. Before using your electric Grill, clean the cooking surface. If necessary, use a wet cloth with
a little bit of detergent.
2. Make sure the electric Grill is properly plugged.
3. Select the desired temperature with the temperature control knob; it will take a few minutes
to reach the temperature. The light signal will turn on.
4. When the light signal turns off, the electric Grill has reached the desired temperature and is ready
to cook.
5. While in use, the signal light will turn off and on. That means that the thermostat is working
to reach the desired temperature, or that the temperature has been reached and, therefore, the
thermostat stops working.
6. Cooking time will vary depending on the type of food to be cooked.
7. When the food is ready, turn off the appliance and remove the food with a wooden or silicone
spatula, as a metal spatula could damage the product.
8. When you have finished using the grill, please unplug the appliance from the mains supply
Rock&Water 2500
10
Tabla de contenido
loading

Tabla de contenido