Sveon SPremiere Serie Manual De Usuario página 36

15. Firmware upgrading
SPM250 allows you to upgrade its firmware to enjoy improvements and new functions. The upgradings of the device are
available in the official Sveon website: www.svoen.com. You can also ask our Technical Support department about new
firmware updates.
Follow these steps to upgrate the firmware of your unit:
1. Copy the upgrading file in a memory USB stick.
2. Connect the USB stick to one of the USB Host ports of the unit. Connect the device to the TV, turn it on and then select
"Setup" option, "System" and "System upgrading".
3. Select "Update" and press "Enter":
4. During the upgrade of the firmware please don´t
press any button of the remote control. It is very im-
portant you don´t disconnect the device. If during the
firmware upgrading, the device is suddenly discon-
nected from the power outlet, it could cause important
damages.
5. When the firmware upgrade finishes, the unit will be restarted automatically.
6. Disconnect the USB memory and delete the file.
If you have any doubt please contact with your Technical Support department::
16. FAQs
The remote control doesn´t work.
Please make sure the batteries are properly installed or charged.
The audio signal is disabled.
Check if the "Mute" option is enabled or not.
Check in "Setup" menu if the audio output is properly selected accordingly to the connection.
If you are playing a file with different audio tracks please check if you have selected the correct audio track by pressing
"Audio" button of the remote control serveral times until find the correct option.
My TV doesn´t show signal.
Check if your TV and your SPM250 are powered on.
Check if the cables you have used to connect the STV250 to the TV are properly connected.
Check if the video output selected in the SPM250 is the same than the video output option selected in the TV. Press "TV
System" button to choose between the different video modes.
I can not access to the USB external devices.
Check if the USB device is properly connected to one of the USB Host ports of the unit.
If you are using an USB stick, please make sure the device is not protected against writting.
If you are using an external hard disk, please make sure it receives power enough to work. If it doesn´t, please connect
its power adaptor for a correct power supply.
Check if the device is formatted in FAT16/32 or NTFS.
In "Network" section doesn´t appear any IP address.
Check if you have connected a Wireless LAN Adaptor properly to one of the USB Host ports of hte unit. Check if your Router
assigns an automatic IP or if you have to enter the IP address in a manual mode.
[email protected]
+34 902 402 503
SPM250 User guide
Index
1. Welcome
2. Features
3. Content
4. Hardware
5. Remote Control
6. TV Connections
6.1 AV Connection
6.2 HDMI Connection
7. USB device connection
8. Playback from card reader
9. First time usage
9.1 Starter Screen
10. Main Menu
10.1 Movie
10.2 Music
10.3 Photo
10.4 File Copy
10.5 Setup
11. Basic operations
12. Network functions
12.1 Wired LAN connection
12.2.1 IP Setup
12.2.2 IP data on Windows XP
12.2.3 IP data on Windows Vista
12.2 Wireless LAN connection
12.2.1 Infraestructure (AP)
12.2.2 Point to Point (Ad Hoc)
13. Files sharing
13.1 Windows XP
13.2 Windows Vista
13.2.1 Mode 1
13.2.2 Mode 2
14. File access through the network
14.1 My Shortcuts
14.2 My Neighbors
15. Firmware upgrading
16. FAQs
English 36