wtw Turb 430 IR/T Instrucciones De Operación página 10

Operation
Inserting a 28 mm cell
Aligning the cell
10
1
2 Insert the cell so that it is positioned on the bottom of the cell
shaft.
The cell is ready to be measured.
3 Align the cell (see below).
1 Clean the cell.
2 Insert the cell.
3 Align the cell:
 Press and hold the <START/ENTER> key.
 Slowly and in small steps rotate the cell by one complete
rotation (by 360 °).
After each step wait for a short time until the displayed
measured value is stable.
 Turn the cell back to the position with the lowest measured
value.
4 Release the <START/ENTER> key.
Measurement starts. The measured value is displayed.
Turb 430 IR/T
ba75506edfs03 11/2017