Saving The Unit (°C Or °F) When Measuring Temperature; Deactivation Of Automatic Shutdown; Activation Of The V-Live Function; Modification Of The Buzzer Threshold Indication For Continuity Tests - PCE Instruments F 03 Manual De Instrucciones

3.8.8 Saving the unit (°C or °F) when measuring
temperature
Hold the yellow key down and turn the selector switch from
the OFF to the T° position.
The instrument buzzes twice, then the T° symbol lights up
and the °F symbol flashes if the instrument was previously in
°C or the °C symbol flashes if it was in °F.
The configuration chosen is saved when the key is released:
the °F or °C symbol remains lit continuously.

3.8.9 Deactivation of automatic shutdown

Hold the HOLD key down and turn the selector switch from
the OFF position to the position.
The instrument buzzes twice then the symbol flashes.
P
The configuration chosen is saved when the key is released:
the symbol remains lit continuously.
P
The instrument returns to automatic shutdown mode when
the switch is placed in the OFF position.

3.8.10 Activation of the V-Live function

Hold the HOLD key down and turn the selector switch from
the OFF position to the V position.
The instrument buzzes twice then the V and symbols start
to flash.
The configuration chosen is saved when the key is released:
the V symbol then remains continuously lit and the symbol
flashes.
Follow the same procedure to deactivate the V-Live function:
the symbol is no longer lit when the key is released.
3.8.11 Modification of the buzzer threshold indication
for continuity tests.
Hold the yellow key down and turn the selector switch from
the OFF to the position.
The instrument buzzes once, the Ω and
symbols and the
threshold value light up (default value 40.0).
It can then be set between 1 Ω and 40 Ω by a series of presses
on the yellow key (short press: in increments of 1 Ω; key held
down: in increments of 10 Ω).
Once the value is chosen, activate the selector switch to save.

3.8.12 Setting the instrument's default parameters.

Hold the yellow key down and turn the selector switch from
the OFF to the A position.
The instrument buzzes twice then all the segments of the
digital display and the symbol flash.
The default settings are saved when the key is released: the
display stops flashing and the symbol disappears.
33