Temperature Measurement (T°); Without A Sensor; With A Sensor; Secondary Functions - PCE Instruments F 03 Manual De Instrucciones

3.7 Temperature measurement (T°)

3.7.1 Without a sensor

Set the selector switch to the "T°" position.
The temperature displayed is the instrument's internal
temperature (the INT symbol is lit), which is the same as the
ambient temperature after a sufficient thermal stabilisation time.
It can be expressed as °C or °F: the unit is chosen with the
yellow key.

3.7.2 With a sensor

1. Connect the sensor (couple K) to the clamp terminals,
complying with the polarity indicated, and put in the place
where the temperature is to be measured.
2. Set the selector switch to the "T" position. The temperature
displayed is that of the sensor (EXT symbol is lit), it can be
expressed in °C or °F: the unit is chosen with the yellow
key.
Characteristics
Function Internal temperature
Type of sensor Integrated circuit
Display range 400°C
400°F
-10.0°C to
Measuring +50.0°C
range +15.0°F to
+120.0°F
Accuracy ± 1.5°C
±2.7°F
Resolution
Detection of
-
sensor cutoff
Thermal time
0.7 min./°C
constant
Note : The accuracy stated for external temperature
measurement does not take the accuracy of the K couple
into account.
MIN/ MAX Mode:
- Accuracy: ditto preceding table + 0.2% L
- Capture time: 100 ms typ. (every 800 ms)

3.8 Secondary functions

3.8.1 Blocking the display

A short press on the HOLD key freezes the display.
The display is cleared when the key is pressed for the second
time.
External temperature
K couple
400°C 4,000°C
400°F 4000°F
-50.0°C to +400°C to
+399.9°C +1,000°C
-50.0°F to +400°F to
+399.9°F +1832°C
1% L ±1.5°C 1% L ±1.5°C
1% L ±2.7°F 1% L ±2.7°F
0.1°C 1°C
0.2°F 1°F
INT symbol lit
instead of EXT
According to the sensor model
31