Hotpoint Ariston HLB9.8AADCX/HA Manual De Instrucciones página 34

Servicing the grease fi lter (A)
GB
If washed in a dishwasher, the metal fi lter may change
colour, but this does not affect its performance.
Antigrease fi lter maintenance (Dual fi lter drawing)
The antigrease fi lter absorbs the grease particles that form
while cooking. This fi lter performs better than standard fi lters
as it combines a fi lter entirely made of steel with a fi lter with
various layers of metallic mesh. It must be cleaned at least
once a month with non-aggressive detergents by hand or in
the dishwasher at low temperature and with a short cycle.
Pull the spring release handle to dismantle the grease fi lter.
Servicing the charcoal fi lter (B)
The charcoal fi lter retains unpleasant cooking odours.
The fi lter saturates after a variable time, depending on the
type of cooking and how often the grease fi lter is cleaned.
The cartridge must be replaced at least once every twenty
months.
This fi lter can NOT be washed or regenerated
B
*
Only available in certain models
34
The grease fi lter retains the
particles of grease produced
during cooking; it must be
cleaned at least once a month
w i t h a n o n - a g g r e s s i v e
detergent, either by hand or
A
with a low temperature, short
dishwasher cycle.
To extract the grease fi lter,
pull the spring loaded handle.
Disassembly: Remove the
activated-carbon filter by
pressing the two front levers
B
which secure it to the hood.
A s s e m b l y : S e c u r e t h e
activated-carbon fi lter fi rst in
the back using the hood's
metal tabs and then in the
front by pressing the two
levers.
High Performance odour fi lter maintenance. (Drawing
cylindrical fi lter + aesthetic box
The activated carbon fi lter absorbs unpleasant cooking
odours. To obtain an excellent ventilation performance, the
fi lter is bigger than standard fi lters and is installed inside the
box placed above the hood. Carbon fi lter saturation takes
*
place after a variable period of use, depending on the type
of cooker and on the frequency of cleaning the grease fi lter.
The cartridge needs replacing at least every fi ve years. This
fi lter CAN NOT be washed or regenerated.
*
Disassembly: Unfasten the
front panel of the box housing
the fi lter from the top, remove
it completely from the box and
access the cylindrical fi lter.
Remove the filter securing
screw with a suitable tool and
pull it out with both hands. To
carry out this operation, the
use of gloves and a ladder is
advised.
Assembly: Insert the filter
inside the box paying attention
to its orientation (the hollow
part of the fi ler must face the
hood).
Secure the filter with the
fastening screw provided.