Switch no.
MSW10-4
MSW10-5
MSW10-6
MSW13-1
MSW13-5
MSW13-6
Note:
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other conditions,
the motor and printing may occasionally stop which causes white stripes in the printout. To print
high-density data, set MSW2-3 (Spool Print) to ON to reduce striping, although this increases the
time before printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF .
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Function
Initial setting
Invalid
Old Command
Not by
Buzzer Event
C.Open
Tone 2
Buzzer Sound
Low/ All
Security/Target
Discoverable No Response, Discoverable
BT Device Scan
Valid
Auto Reconnect
V10 CONSUMIBLES S.L.
Invalid, CBM1, CBM2
All Event/Error, Not by C.Open, Not by C.Open/PE
Tone 1, Tone 2, Tone 3, Tone 4
Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired
only
Invalid, Valid
— 55 —
Settin g value