General Safety Instructions; Machine-Related Safety Instructions - Festool RAS 180.03 E-HR Manual De Instrucciones

Brush machine
RUSTOFIX RAS 180.03 E-HR
Table of contents
1 Symbols
2 Technical data
3 Machine features
4 Intended use
5 Safety instructions
5.1 General safety instructions
5.2 Machine-related safety instructions
5.3 Emission levels
6 Commissioning
7 Machine settings
7.1 Electronics
7.2 Changing the brushes
7.3 Adjusting the texture depth
7.4 Dust extraction
8 Working with the machine
9 Service and maintenance
10 Disposal
11 Accessories
12 Warranty
The specifi ed illustrations are at the beginning of
this operating manual.
1 Symbols
Warning of general danger
Electric shock
Read the operating instructions/notes
Wear ear protection!
2 Technical data
Power consumption
Rotational speed
dia.
Tool
Spindle thread
Dust extractor connection diameter
Protection class
Weight
3 Machine features
[1-1] On/off switch
[1-2] Switch-on lock
[1-3] LED
12
[1-4] Speed control
[1-5] Support roller
[1-6] Depth adjustment wheel
[1-7] Extractor connector
4
According to specifi cations, the machine is de-
signed to brush and texture wooden surfaces.
The user bears the responsibility for damage and
accidents caused by improper use.
5

5.1 General safety instructions

all instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
- Never allow children to use the machine.

5.2 Machine-related safety instructions

- This power tool is intended to function as a
wire brush. Read all safety warnings, instruc-
tions, illustrations and specifi cations provided
with this power tool. Failure to follow all in-
structions listed below may result in electric
shock, fi re and/or serious injury.
- Operations such as grinding, sanding, polish-
ing or cutting-off are not recommended to be
performed with this power tool. Operations
for which the power tool was not designed may
create a hazard and cause personal injury.
- Do not use accessories which are not specifi -
cally designed and recommended by Festool.
Just because the accessory can be attached to
your power tool, it does not assure safe opera-
1500 W
tion.
800 - 4000 rpm
- The rated speed of the accessory must be at
150 mm
least equal to the maximum speed marked on
M 14
the power tool. Accessories running faster than
27 mm
their rated speed can break and fl y apart.
/ II
- The outside diameter and the thickness of your
7.5 kg
accessory must be within the capacity rating of
your power tool. Incorrectly sized accessories
cannot be adequately guarded or controlled.
- The arbour size of wheels, fl anges, backing
pads or any other accessory must properly fi t
the spindle of the power tool. Accessories with
Intended use
Safety instructions
WARNING! Read all safety warnings and