Napa 791-6420 B Manual Del Propietário

BEFORE USING THIS DEVICE, READ THIS
MANUAL COMPLETELY AND THOROUGHLY,
UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND
MAINTENANCE REQUIREMENTS.
It is the responsibility of the device owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels are lost
or not legible, contact NAPA for replacements. If the operator is not
fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by
the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
SPECIFICATIONS
Capacity ............................................................... 3-1/2 Ton
Low Height ....................................................................... 4"
High Height ..............................................................20-1/2"
Handle Length ................................................................ 50"
Overall Length ..........................................................28-1/2"
Overall Width ............................................................14-1/4"
Saddle Diameter .........................................................5-1/2"
Shipping Weight ................................................... 105.6 lbs.
791-6420 B
WARNING
• Read, study, understand and follow all instructions before
operating this device. • Inspect the jack before each use.
Do not use if damaged, altered, modified, in poor condition,
leaking hydraulic fluid or unstable due to loose or missing
components. Make corrections before using. • Use only on
a hard level surface free from obstructions so the jack is free
to reposition itself during lifting and lowering operations.
• Lift only on areas of the vehicle as specified by the vehicle
manufacturer. • User and bystanders must wear eye
protection that meets ANSI Z87.1 and OSHA standards.
• Do not use jack beyond its rated capacity. Do not shock
load. • This is a lifting device only. Immediately after
lifting, support the vehicle with jack stands capable
of sustaining the load before working on the vehicle.
• Center load on saddle. Be sure setup is stable before
working on vehicle. • Do not move or dolly the vehicle while
on the jack. • Do not use any materials that may serve as
risers, spacers or extenders between the stock lifting saddle
and the load. • Do not use any adaptors that replace the
stock lifting saddle unless approved or supplied by the jack
manufacturer. • Do not use (or modify) this product for any
other purpose than that for which it was designed without
consulting the manufacturer's authorized representative.
• Always lower the jack slowly and carefully. • This product
contians chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands thoroughly after handling. • Failure to heed
these warnings may result in serious or fatal personal injury
and/or property damage.
1
MODEL # 791-6420 B
3-1/2 TON CAPACITY
SERVICE JACK
12/30/14