Multiplex FUNCUB Next Generation Instrucciones De Montaje página 12

Accessories and tools
Required accessories
• 2 x Zacki2 ELAPOR
®
• 1x Zackivator - activator for Zacki and CA adhesive
• 1 x receiver RX-7-DR light M-LINK 2.4 GHz
• 1 x ROXXY EVO LiPo 3 - 2600M 40C with BID chip
When using aero-tow release, we recommend:
EN
• 1 x receiver RX-9-DR M-LINK 2.4 GHz
(instead of RX-7)
Optional accessories
• 1 x cockpit SX telemetry set
• 1 x float kit FunCub
• 1 x float kit FunCub NG blue
• 1 x servo 55+ for aero-tow release
• 1 x POWER-MULTIlight
• 1 x LiPo checker
• 1 x Hitec multi charger X1 red
• 1 x Wingstabi 7 channel
• 1 x Wingstabi RX 7 DR
• 1 x propeller balancer
Scope of delivery FunCub NG RR
• 1 Elapor model (almost fully assembled)
®
• 1 drive motor ROXXY BL C35-42-930
• 1 controller ROXXY BL Control 740 S-BEC
• 4 servo Hitec HS-55+
• 2 servo Hitec HS-65HB
• 1 propeller 13x4
12
20g
Required tool
# 1-01291 • 1 x medium-sized slotted screwdriver
# 1-01032
• 1 x small flat nose pliers
# 55810
• 1 x hex wrench 1.5 mm (included)
# 316656 • 1 x 10 mm open-ended wrench or socket wrench
• 1 x sheet of 240-320 grit sandpaper
# 55812
# 25161
# 1-01539
# 1-01585
# 1-01205
# 73030
# 118380
# 114131
# 55010
# 55012
# 332355
Specifications
Wingspan
Overall length
# 1-01484
Flight weight
# 1-01317
Wing area
# 1-01205
Wing loading
# 112065
RC functions
# 733114
1410 mm
1050 mm
1380 g
39.9 dm²
34.6 g/dm²
Aileron, elevator, rudder, motor,
landing flaps, optional aero-tow release