Samsung NV51K7770S Serie Manual Del Usuario página 49

Volume
Adjust the volume level for beeps and melodies.
• Tap Settings > Volume, and then use the bar next to Volume to adjust
the volume.
Temp
1. Temp unit
You can program the oven control to display the temperature in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
Tap Settings > Temp > Temp unit, and then tap in the right screen. You
•
can select °C or °F.
2. Temp adjust
The temperature in the oven has been calibrated at the factory. When first
using the oven, be sure to follow recipe times and temperatures.
If you think the oven is too hot or too cool, you can correct the temperature in
the oven. Before correcting, test a recipe by using a temperature setting that
is higher or lower than the recommended temperature.
The baking results should help you to decide how much of an adjustment is
needed. The oven temperature can be adjusted ±35 °F (±19 °C).
• Tap Settings > Temp > Temperature Adjust, and then tap in the right
screen. You can increase or decrease the temperature by 35 °F (19 °C).
NOTE
This adjustment will not affect the broiling or the self-cleaning temperatures. The
adjustment will be retained in memory after a power failure.
12 hour energy Saving
If you accidently leave the oven on, this feature will automatically turn off the
oven after 12 hours during baking functions or after 3 hours during a broil
function.
Tap Settings > 12 hour energy Saving, and then tap ON in the right screen.
1.
2. The 12 hour energy saving icon will appear in the indicator area.
NV51K7770S_AA_DG68-00857A-03_EN+MES+CFR.indb 49
Easy connection
Easy connection enables you to easily configure the network settings including the
authentication procedure.
Help
Help provides useful tips and explanations on a specific item that you select.
1. Troubleshooting
• Tap a checkpoint directly on the screen, and try the suggestions.
2. Guide for first use
Provides simple instructions on the basic use of the oven.
•
About device
You can see information about the oven and do a software update.
To update the software:
1. Tap Settings > About device > SW update, and then tap Update in the right
screen.
Tap INSTALL. The software is updated and the system restarts automatically.
2.
Sabbath
You can set Sabbath mode. See the Using the Sabbath feature section on the next
page.
Demo mode
This option is for use by retail establishments for display purposes only. (The
heating element does not operate.)
1. Tap Settings > Demo mode, and then tap ON in the right screen.
2. The Demo mode indicator appears on screen.
English 49
2018-08-29 2:18:37