Unpacking; Removing The Transport Lock; Assembling The Device; Acclimatizing The Device - Sartorius Entris BCE6202 Instrucciones De Manejo

5.3

Unpacking

Procedure
Unpack the device .
t
If the device is stored temporarily: Observe the storage
t
information (see Chapter 13 .1, page 33) .
Keep all parts of the original packaging, e .g . to return the
t
device .
5.4

Removing the Transport Lock

Procedure
1
5.5

Assembling the Device

Procedure
3
2
1
Remove the transport locks (1)
t
and retain them for later use .
Place the frame draft
t
shield (1) on the balance .
Attach the shock absorbers (2) .
t
Place the weighing pan (3)
t
on top .
5.6

Acclimatizing the Device

When a cold device is brought into a warm environment:
The temperature difference can lead to condensation from
humidity in the device (moisture formation) . Moisture in the
device can lead to malfunctions .
Procedure
Allow the device to acclimatize for approx . 2 hours at the
t
installation site . The device must be disconnected from the
power supply beforehand .
Entris ®
Installation
BCE Operating Instructions 15