Important Considerations; Manual Mode - Heath Zenith 5051 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

AVOID AIMING THE SENSOR AT:

• Below are examples of objects that might produce heat and may cause the motion sensor to trigger:

• Pools of Water

• Animals

If you suspect that a heat source of this type is triggering the motion sensor, reduce the sensitivity.

• Areas where pets or traffic may trigger the motion sensor.

• Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the

motion sensor.

SEASONAL CHANGES:

The motion sensor works by sensing temperature changes across its field of view. The closer the surrounding tempera-

ture is to a person's body heat, the less sensitive the sensor will appear. The greater the temperature difference, the more

sensitive the sensor will appear. The sensitivity (SENS) switch might need to be readjusted as the outside temperature

changes for the different seasons. This is a normal part of the light sensor's operation.

DualBrite mode is a selectable feature that turns the light on at a reduced (accent) level at dusk. When motion is de-

tected, the light will increase to full bright for the amount of the ON-TIME setting (1, 5, or 20 minutes) then returns to

DualBrite mode. The light will stay on at the reduced light level for the amount of time selected (Off, 3 hr., 6 hr., dusk-

to-dawn) and then turn off completely. Once the DualBrite timer runs out, the light will turn ON only when motion

is detected. Selecting OFF disables the DualBrite feature, however the motion sensing features will continue to work.

Note: The Adjustable Color Temperature adjustment is only available when the light is

in full-bright mode. When the light is in accent (DualBrite) mode, the LED color is

pre-set to 3000K (Kelvin).

• Turn the Adjustable Color Temperature dial toward the "Blue" color to increase the

color temperature toward daylight (5000K).

• Turn the Adjustable Color Temperature dial toward the "Orange" color to decrease

the color temperature toward warm white (2700K).

Manual mode overrides the motion sensor and "ON-TIME"

control so the light will operate full bright. This feature only

works at night and only for one night at a time. The motion

sensor will reset to motion sensing mode after 6 hours or

sunrise, whichever comes first. Manual mode can be toggled

on and off using a wall switch. Note: If the power to the

light fixture is off for more than 5 seconds, allow the mo-

tion sensor to warm up prior to switching to manual mode.

• Ensure the power to the light is ON and the sensor has

warmed up (60 seconds).

• To turn manual mode on, switch the power OFF–ON–OFF–ON at the wall switch within 3 seconds.

• To turn manual mode off, switch the power OFF–ON–OFF–ON at the wall switch within 3 seconds.

IMPORTANT: If manual mode does not turn ON or OFF, use a slower pace turning the power ON and OFF at the wall

switch while staying within 3 seconds.

209971-01