Fein WSG20-180 Instrucciones De Uso página 10

OBJ_BUCH-0000000073-001.book Page 10 Wednesday, May 30, 2012 3:17 PM
en
10
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level measured at the
workplace L (re 20 μPa), in decibels
pA
Measuring uncertainty K
Measured A-weighted sound power level L
in decibels
Measuring uncertainty K
C-weighted peak sound pressure level measured at the work-
place L , in decibels
pCpeak
Measuring uncertainty K
Vibrations
Mean vibrational value for angle grinding
2
– m/s
2
– ft/s
Mean vibrational value for sanding with sanding sheet
2
– m/s
2
– ft/s
Measuring uncertainty K, in
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency
isdecreased.
, in decibels
pA
(re 1 pW),
wA
, in decibels
wA
, in decibels
pCpeak
, in
h,AG
Recommended dimensions of extension cord-
sat an operating voltage of 120 V – single-
phase a. c., with only one power tool
WSG20-180/WSG20-230 connected:
WSG20-180
, in
h,DS
Max. cable length, ft Max. cable length, m
≤ 100 100 200
–200 –300
Min. conductor size Min. conductorcross-
A.W.G. section, mm
16 14 12
WSG20-230
87 87
3 3
98 98
3 3
103 103
3 3
6.0 6.0
19.6 19.6
2.5 2.5
8.2 8.2
1.5 1.5
4.9 4.9
≤ 30 30 60
– 60 –100
2
1.5 2.5 4