Bosch PS130 Instrucciones De Funcionamiento Y Seguridad página 4

2610056735 02-21 PS130_BM 2610015935 02-12.qxp 2/15/21 10:23 AM Page 4
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
e. Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries
unpredictable behavior resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool
f.
to fire or excessive temperature.
Exposure to fire or temperature above
265 °F may cause explosion.
g. Follow all charging instructions and
do not charge the battery pack or
tool outside the temperature range
specified in the instructions.
Charging
Safety Rules for Cordless Hammer Drills
Wear ear protectors when impact
a.
drilling. Exposure to noise can cause
hearing loss.
Use auxiliary handle(s). Loss of
b.
control can cause personal injury.
Hold the power tool by insulated
c.
gripping surfaces, when performing
an operation where the cutting
accessory or fasteners may contact
hidden wiring. Cutting accessory or
fasteners contacting a "live" wire may
make exposed metal parts of the
power tool "live" and could give the
operator an electric shock.
d. Use clamps or another practical way
to secure and support the workpiece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of
control.
Do not drill, fasten or break into
e.
existing walls or other blind areas
where electrical wiring may exist. If
this situation
disconnect all fuses or circuit breakers
feeding this worksite.
f. Always wear safety goggles or eye
protection when using this tool. Use a
dust mask
applications which generate dust.
Use thick cushioned gloves and limit
g.
the exposure time by taking frequent
rest periods. Vibration caused by
hammer-drill action may be harmful to
your hands and arms.
may exhibit
improperly or
is unavoidable,
or respirator
temperatures outside the specified
range may damage the battery and
increase the risk of fire.
6. Service
Have your power tool serviced by a
a.
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
Never service damaged battery
b.
packs. Service of battery packs should
only be
manufacturer or authorized service
providers.
at
Secure the material being drilled.
h.
Never hold it in your hand or across
legs. Unstable support can cause the
drill bit to bind causing loss of control
and injury.
Disconnect battery pack from tool
i.
before making
adjustments or changing accessories.
Such preventive safety measures
reduce the risk of starting the tool
accidentally.
Position yourself to avoid being
j.
caught between the tool or side
handle and walls or posts. Should the
bit become bound or jammed in the
work, the reaction torque of the tool
could crush your hand or leg.
k. If the bit becomes bound in the
workpiece, release the trigger
immediately, reverse the direction of
rotation and slowly squeeze the
trigger to back out the bit. Be ready
for a strong reaction torque. The drill
body will tend to twist in the opposite
direction as the drill bit is rotating.
Do not grasp the tool or place your
l.
hands too close to the spinning chuck
or drill bit.
lacerated.
for
m. When installing a drill bit, insert the
shank of the bit well within the jaws
of the chuck. If the bit is not inserted
deep enough, the grip of the jaws over
the bit is reduced and the loss of
control is increased.
-4-
performed by
any assembly,
Your hand may be
the